Suzuki DRz400S/SE Installation Guide

• Remove upper bolt from passenger footpeg bracket (point A)- bolt will be re-used.

• Remove license plate bracket from fender

• Position bracket as shown in picture above, install all bolts- leave loose at this time.

• Install rear cross brace (E) bolts and nuts to side brackets (point D) 

• Install license plate bracket bolts through bracket, cross brace and fender.

• Tighten all bolts.

Use of Locktite or similar product on bolt threads is recommended

©,2002,2003 Moto-Sport Panniers Inc.